Super-micro-computer 6015B-Ni Bedienungsanleitung PDF herunterladen (Seite 68)

7-2

UPERSERVER 6015B-Ni User's Manual

7-2 Running Setup

Default settings are in bold text unless otherwise noted.

The BIOS setup options described in this section are selected by choosing the ap-

propriate text from the main BIOS Setup screen. All displayed text is described in

this section, although the screen display is often all you need to understand how

to set the options (See the next page).

When you ﬁ rst power on the computer, the Phoenix BIOS™ is immediately acti-

vated.

While the BIOS is in control, the Setup program can be activated in one of two

ways:

1. By pressing <Delete> immediately after turning the system on, or

2. When the message shown below appears brieﬂ y at the bottom of the screen during

the POST (Power On Self-Test), press the <Delete> key to activate the main Setup

menu:

Press the <Delete> key to enter Setup

7-3 Main BIOS Setup

All main Setup options are described in this section. The main BIOS Setup screen

is displayed below.

Use the Up/Down arrow keys to move among the different settings in each menu.

Use the Left/Right arrow keys to change the options for each setting.

Press the <Esc> key to exit the CMOS Setup Menu. The next section describes in

detail how to navigate through the menus.

Items that use submenus are indicated with the

 icon. With the item highlighted,

press the <Enter> key to access the submenu.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 119 120

Keine Kommentare

Super-micro-computer 6015B-Ni Bedienungsanleitung Seite 68